[Syrupmakers] excelsior mill

[Richard Harrison]

Peter,
     Call me about a kettle. I have a good lead for you. Will give you a phone number.
                                           Richard

G Wilson <glenarchie at webtv.net> wrote:
    Peter

     I had a 10 inch Excelsior mill and it had adjusters on the discharge roller.  They are wedge shaped, made of cast iron.  To adjust the roller all you do is tighten the wedge into the space it is in and that in turn  lifts the roller closer to the upper roller.  The feed roller is adjusted with shims.

T C Wilson
Eureka, Kansas
  
---------------------------------
  From: Ptrpdt at aol.com
Sent: Monday, January 28, 2008 3:34 PM
To: syrupmakers at syrupmakers.net
Subject: [Syrupmakers] excelsior mill

      I have an excelsior mill with a 10 inch roller. It is a power mill. does anyone know how to adjust the discharge roller as there aren't any set screws to allow for movement of roller nor any holes to install any. this is my first mill so there may just be an over site on my part. any literature would also be appreciated. I have looked on inter net with no success, also looking for a 80 gal. or larger kettle. I live in La.(Louisiana not lower Alabama ). will be traveling to GA. in 2 weeks so pick-up would not be a problem, also as I am just getting started I am also in need of seed cane.
   
                                                                      peter



    
---------------------------------
  Start the year off right. Easy ways to stay in shape in the new year. 

_______________________________________________
Syrupmakers mailing list
Syrupmakers at syrupmakers.net
http://lists.syrupmakers.net/mailman/listinfo/syrupmakers


       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.syrupmakers.net/pipermail/syrupmakers/attachments/20080129/e1919077/attachment.html