[Syrupmakers] chains and sprockets

[bill gunter]

JT,
   
  If you do it with the gearbox as such, look at the way Ken 
  has his set up.  It sounds like it would be set up the same 
  way.
   
  Bill Gunter
  Perry, Florida

jimmy henderson <jim8544 at yahoo.com> wrote:
  
JT, I've got a gearbox that was used on a Golden # 2
mill. It is set up to sit directly on top of the mill
and be pulled by a tractors pto. You would need a
small bank of dirt to put the tractor on to get the
gearbox and tractor in line. If you used a long pto
shaft the angle could be grater than if you used a
shorter one. Then all you would have to do is anchor
the gearbox where it wouldn't turn.
Jim Henderson


____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page. 
http://www.yahoo.com/r/hs
_______________________________________________
Syrupmakers mailing list
Syrupmakers at syrupmakers.net
http://lists.syrupmakers.net/mailman/listinfo/syrupmakers


       
---------------------------------
Never miss a thing.   Make Yahoo your homepage.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.syrupmakers.net/pipermail/syrupmakers/attachments/20080229/b6c89e3f/attachment-0001.html