[Syrupmakers] chattanooga mill shaft

[verlon beck]

Hi JT
       If your shafts are only worn you can have them turned down at a machine shop and bushings installed. I did my # 12 and they are like new.
  ----- Original Message ----- 
  From: Raymond Weaver 
  To: syrupmakers at syrupmakers.net 
  Sent: Monday, February 11, 2008 4:44 PM
  Subject: Re: [Syrupmakers] chattanooga mill shaft


      JT, on mine you DO NOT remove the shaft. The shaft and roller are all one piece of cast iron. The gear is separate. I realize that there might be a later model that had a two-piece design.


    ----- Original Message ----- 
    From: DBACrownhoney at aol.com 
    To: syrupmakers at syrupmakers.net 
    Sent: Monday, February 11, 2008 1:36 PM
    Subject: [Syrupmakers] chattanooga mill shaft


    Does any body know if and how to remove the shaft from the small roller on a Chattanooga no.13?


    JT





----------------------------------------------------------------------------
    The year's hottest artists on the red carpet at the Grammy Awards. AOL Music takes you there.


----------------------------------------------------------------------------


    _______________________________________________
    Syrupmakers mailing list
    Syrupmakers at syrupmakers.net
    http://lists.syrupmakers.net/mailman/listinfo/syrupmakers



----------------------------------------------------------------------------


    No virus found in this incoming message.
    Checked by AVG Free Edition. 
    Version: 7.5.516 / Virus Database: 269.20.2/1271 - Release Date: 2/11/2008 8:16 AM



------------------------------------------------------------------------------


  _______________________________________________
  Syrupmakers mailing list
  Syrupmakers at syrupmakers.net
  http://lists.syrupmakers.net/mailman/listinfo/syrupmakers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.syrupmakers.net/pipermail/syrupmakers/attachments/20080222/3246d905/attachment.html