[Syrupmakers] Chains and sprockets

[njbj at windstream.net]

I like your mill set up. is that mower gearbox on top if so what size mower was it ?

thanks nick s.c.s.m. in Florida
  ----- Original Message ----- 
  From: Ken Christison 
  To: syrupmakers at syrupmakers.net 
  Sent: Tuesday, February 19, 2008 12:10 PM
  Subject: RE: [Syrupmakers] Chains and sprockets


  JT,

  My Chattanooga mill was converted about 15 years ago by a friend, and
  he used #60 chain. My mill can be seen by going to:
  http://www.syrupmakers.org/conversions/chattanooga-13/

  Take care.

  Ken





    ----- Original Message ----- 
    From: 
    To: syrupmakers at syrupmakers.net
    Sent: 2/20/2008 6:15:08 AM 
    Subject: [Syrupmakers] Chains and sprockets


    I was wondering if ya'll had an opinion on chain and sprocket sizes for converting a Chattanooga 13 to engine powered. The southernmatters web site says to use a 100 size chains, but I went to a industrial supply store to look at some and they are huge. It just seems like overkill.  


    JT





------------------------------------------------------------------------------


  _______________________________________________
  Syrupmakers mailing list
  Syrupmakers at syrupmakers.net
  http://lists.syrupmakers.net/mailman/listinfo/syrupmakers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.syrupmakers.net/pipermail/syrupmakers/attachments/20080220/b16d93c3/attachment.html