[Syrupmakers] bearings

[BOBBY and JOYCE MCDANIEL]

Ken,  The Syrupmaker meeting is scheduled for January 27th at the Panhandle Pioneer settlement located two miles west of the red light in Blountstown, Fl  Highway 20 Look for sign.  Agenda 9:30 Registration, 10:00 Cane varieties,10:45 Weed-Grass control in cane, 11:30 Syrup Making methods by W Pope,  Lunch, if you want lunch for a donation E-mail David White at Dwhite@ GTcom.net 12:45 Slide show and talk on cane mills in America over the years By Don Dean, 1:30 Effective LP Gas burners for cooking Syrup by D. White. Fellowship and getting to know other Syrupmakers.   I Think every one will enjoy,   Bobby  
  ----- Original Message ----- 
  From: reit8472 
  To: syrupmakers at syrupmakers.net 
  Sent: Monday, December 18, 2006 9:54 PM
  Subject: Re: [Syrupmakers] bearings


  Bobby, Please tell us the who, what, when , where of the Syrup Makers meeting you spoke of.

  Ken Reitsma
    ----- Original Message ----- 
    From: BOBBY and JOYCE MCDANIEL 
    To: syrupmakers at syrupmakers.net 
    Sent: Monday, December 18, 2006 9:18 PM
    Subject: Re: [Syrupmakers] bearings


    Sam   the Syrup Maker meeting in Blountstown in January the 27th will be a good place for the help that you need on your mill It could well be worth your trip. Give it some thought.  Thanks Bobby Sugarcane in Sneads, FL
    ----- Original Message ----- 
    From: "sam mcbroom" <sjmcbroom1 at hotmail.com>
    To: <syrupmakers at syrupmakers.net>
    Sent: Thursday, December 14, 2006 12:27 PM
    Subject: [Syrupmakers] bearings


    > I finally got my new chattanooga # 13 disassembled. did not break anything.
    > the gears look really good.
    > The shaft on the big roller has been broken and welded back in the past. 
    > looks ok.
    > The big roller shaft is going to have to be turned on a lathe, to smoothe 
    > out, maybe built up.
    > all the bearing boxes are in good shape. the bearings were brass on one 
    > side, lead on the other side.
    > All the bearings will have to be rebuilt.
    > I think the old owner tightened up too much, damaging the bearings.
    > 
    > Is there anyone out there that rebuilds bearings. I am willing to pay for 
    > the service, if someone knows how, and can do the work.
    > 
    > again,  the mill is completely dissembled, and cleaned up.
    > 
    > thanks, sam 850 892 7592, DeFuniak Springs.
    > 
    > _________________________________________________________________
    > All-in-one security and maintenance for your PC. Get a free 90-day trial! 
    > http://clk.atdmt.com/MSN/go/msnnkwlo0050000002msn/direct/01/?href=http://clk.atdmt.com/MSN/go/msnnkwlo0050000001msn/direct/01/?href=http://www.windowsonecare.com/?sc_cid=msn_hotmail
    > 
    > ____________________________________________________
    > If you grow sorghum and are not a member of the NSSPPA 
    > please check us out at: http://www.ca.uky.edu/nssppa/
    > Syrupmakers archives are located at:
    > http://lists.syrupmakers.net/pipermail/syrupmakers/
    > ____________________________________________________
    > 


----------------------------------------------------------------------------


    ____________________________________________________
    If you grow sorghum and are not a member of the NSSPPA 
    please check us out at: http://www.ca.uky.edu/nssppa/
    Syrupmakers archives are located at:
    http://lists.syrupmakers.net/pipermail/syrupmakers/
    ____________________________________________________


------------------------------------------------------------------------------


  ____________________________________________________
  If you grow sorghum and are not a member of the NSSPPA 
  please check us out at: http://www.ca.uky.edu/nssppa/
  Syrupmakers archives are located at:
  http://lists.syrupmakers.net/pipermail/syrupmakers/
  ____________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.syrupmakers.net/pipermail/syrupmakers/attachments/20061219/a697e307/attachment.htm