[Syrupmakers] bearings

[BOBBY and JOYCE MCDANIEL]

Sam   the Syrup Maker meeting in Blountstown in January the 27th will be a good place for the help that you need on your mill It could well be worth your trip. Give it some thought.  Thanks Bobby Sugarcane in Sneads, FL
----- Original Message ----- 
From: "sam mcbroom" <sjmcbroom1 at hotmail.com>
To: <syrupmakers at syrupmakers.net>
Sent: Thursday, December 14, 2006 12:27 PM
Subject: [Syrupmakers] bearings


> I finally got my new chattanooga # 13 disassembled. did not break anything.
> the gears look really good.
> The shaft on the big roller has been broken and welded back in the past. 
> looks ok.
> The big roller shaft is going to have to be turned on a lathe, to smoothe 
> out, maybe built up.
> all the bearing boxes are in good shape. the bearings were brass on one 
> side, lead on the other side.
> All the bearings will have to be rebuilt.
> I think the old owner tightened up too much, damaging the bearings.
> 
> Is there anyone out there that rebuilds bearings. I am willing to pay for 
> the service, if someone knows how, and can do the work.
> 
> again,  the mill is completely dissembled, and cleaned up.
> 
> thanks, sam 850 892 7592, DeFuniak Springs.
> 
> _________________________________________________________________
> All-in-one security and maintenance for your PC. Get a free 90-day trial! 
> http://clk.atdmt.com/MSN/go/msnnkwlo0050000002msn/direct/01/?href=http://clk.atdmt.com/MSN/go/msnnkwlo0050000001msn/direct/01/?href=http://www.windowsonecare.com/?sc_cid=msn_hotmail
> 
> ____________________________________________________
> If you grow sorghum and are not a member of the NSSPPA 
> please check us out at: http://www.ca.uky.edu/nssppa/
> Syrupmakers archives are located at:
> http://lists.syrupmakers.net/pipermail/syrupmakers/
> ____________________________________________________
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.syrupmakers.net/pipermail/syrupmakers/attachments/20061218/75eca8f0/attachment.htm